Component Carpentry

Component Carpentry We offer exceptional quality cabinet and trim installation to local contractors, builders, and designers. Cabinet Installation
Trim Installation

Whether high end or affordable, we provide the same level of quality, attention to detail, and customer service on every project.
(2)

From on-site dust collection to meticulous organization and efficiency, we treat every home like our own. We welcome work with local General Contractors and homeowners alike, so please contact us today for any of your carpentry or woodworking needs!

Operating as usual

A little before and after.  Swipe away!Huge thanks to the following for making this project come to life.@mikeburger1017...
12/19/2020

A little before and after. Swipe away!

Huge thanks to the following for making this project come to life.

@mikeburger1017
@lulaw_carpentry
@myk66beth
@thomas_galey4480

The @julian_and_sons A-team killing it on another install. There was a gun room too, but I forgot to take good pictures of it. 🤦‍♂️ so, enjoy the bar and antique vault door! 👍🏻

Just a few pics of the progress @champion_ranch.  This place is going to be pretty epic when it’s done.... @myk66beth @t...
07/24/2020

Just a few pics of the progress @champion_ranch. This place is going to be pretty epic when it’s done.... @myk66beth @thomas_galey4480 @lulaw_carpentry @ Rochelle, Texas

Loaded up for the next two projects!  The guys are starting @champion_ranch today (@myk66beth @thomas_galey4480 @lulaw_c...
07/21/2020

Loaded up for the next two projects! The guys are starting @champion_ranch today (@myk66beth @thomas_galey4480 @lulaw_carpentry), I’m heading for @napa.california tomorrow morning to meet @mikeburger1017 with a stop at Champion on the way.

Line ‘em up and knock ‘em out, gettin’ s**t done!! @ Heber Springs, Arkansas

Timeline Photos
06/06/2020

Timeline Photos

@myk66beth and @lulaw_carpentry knocked another Texas gun room out of the park!  2 guys, 6 days.  Unloaded, installed, t...
06/05/2020

@myk66beth and @lulaw_carpentry knocked another Texas gun room out of the park! 2 guys, 6 days. Unloaded, installed, trimmed, and final oiled. Thank you for your hard work guys, we wouldn’t be where we are today without you!

#woodworking #certifiedinstaller #installer #gunroom #walnut #texas #arkansas #hunting #shooting #guns #customcabinets #outdoors #kickinassandtakinnames #gets**tdone #cabinetinstaller #scribe #craftsmanship #quality #attentiontodetail @ Port O'Connor, Texas

As the saying goes “If you want to make God laugh, just tell him about your plans” - Woody Allen.Just when I thought thi...
03/25/2020

As the saying goes “If you want to make God laugh, just tell him about your plans” - Woody Allen.

Just when I thought things were falling into place for Arizona, I got thrown a curveball.

I’m super stoked to announce that I have accepted the position of Director of Installation for @julian_and_sons .

I can’t wait to get started refining and building their nationwide installation dept. from the perspective of Craftsmanship, Quality, and Efficiency.

More updates to come as I get settled into my new role. Exciting things are on the horizon.

#arkansas #newopportunities #craftsmanship #quality #efficiency #keepcraftalive #gunroom #trophyroom #woodwork #millworkinstaller #cabinetinstaller #triminstaller #lookingforcraftsmen #travelwork #nomadcarpenter #componentcarpentry #hebersprings #julianandsons

There it is.  I said it. Out loud....sort of.  Now it’s real, not just some ambiguous 6 month plan that I keep pushing b...
01/01/2020

There it is. I said it. Out loud....sort of. Now it’s real, not just some ambiguous 6 month plan that I keep pushing back. My lease here in MD is up in June, so that’ll be the date. It’s something that has been on my mind, more as a wish, for awhile now and it’s time to make it a reality...time to shake things up! Still not sure how all the logistics will work, but I will continue the business there. Lots of things to work out, but now I have a deadline. I’ve tagged a bunch of you Arizona-ites in this, so......start lining up the work! 😂. Prob going to rent a house, so any input on good areas, realtors, etc would be greatly appreciated. Excited to start a new chapter.....see you in 6 months, Phoenix! 👍🍻

@mikeburger1017
@newagecabinetryandcoatings @jonathan.newagecabinetry @nasha_construction @esbuildersaz_renoteam @esbuildersaz @swedeconstruction @aft_construction @aft_construction2 @larson_contracting @jcop30 @william_jackson_inc @phoenixconstructiongroup @americanspiritcustombuilders @riverwooddevelopment @joe_w_mitchell @dn3design

A few pics from the recent trip to Wisconsin for @julian_and_sons .  Truly a pleasure to work with like minded craftsmen...
11/26/2019

A few pics from the recent trip to Wisconsin for @julian_and_sons . Truly a pleasure to work with like minded craftsmen @mikeburger1017, @chp_woodcrafting, @myk66beth, and @thomas_galey4480. Heading to Ohio in December! @ Sparta, Wisconsin

Great project for a great cause, pleasure to work on this one for @jt.builders.  👇#Repost @jt.builders with @get_repost・...
09/11/2019

Great project for a great cause, pleasure to work on this one for @jt.builders. 👇

#Repost @jt.builders with @get_repost
・・・
Several months ago, we started this journey with the Stephen Siller Tunnel to Towers Foundation to build a new mortgage-free home for Army SGT Jonathan Harmon. In 2012, Jon was severely injured in Afghanistan while serving our country.

JT Custom Builders, with the help of so many of our awesome trade partners, built this Smart Home for Jon. It’s been our absolute pleasure to work with the Foundation and provide this home for him.

Tomorrow, on 9/11, a ceremony will take place to present the home to Jon.
See more of the Foundation’s work and Jon’s story at this link: https://tunnel2towers.org/sh-recipients/jonathan-harmon/

#jtcustombuilders 📸: @amber.pics531

#hccustomhome

#buildwithus #newhome #homebuilder #builder #customhomebuilder #customhomes #remodeling #remodeler #remodelingcontractors #homeremodeling #remodelingproject #residentialremodeling #marylandbuilders #mountairymd #contractorsofinsta #carrollcountymd #frederickcountymd #projectspotlight #allinadayswork #carpenter #montgomerycountymd @component_carpentry @marylandexcavationcontractors4

08/03/2019

Final day in Wisconsin for @julian_and_sons. Loading out the tools and hitting the road. Been a fantastic trip, looking forward to the possibility of returning for the final phase. Big thanks to @joe_w_mitchell and @julian_and_sons for the opportunity to work with this extremely talented group.

As you can tell, I’m a recent graduate of the Gosselink School of Editing.....😂👍

Roll credits......
@gosselinkfinecarpentry
@lulaw_carpentry
@mikeburger1017
@thomas_galey4480
@myk66beth

08/03/2019

Final day in Wisconsin for @julian_and_sons. Loading out the tools and hitting the road. Been a fantastic trip, looking forward to the possibility of returning for the final phase. Big thanks to @joe_w_mitchell and @julian_and_sons for the opportunity to work with this extremely talented group.

As you can tell, I’m a recent graduate of the Gosselink School of Editing.....😂👍

Roll credits......
@gosselinkfinecarpentry
@lulaw_carpentry
@mikeburger1017
@thomas_galey4480
@myk66beth

08/03/2019

@lulaw_carpentry and I fitting coffer bottoms and trim. No easy feat when the carcass is framed 1.25” out of level and between .5 and 1.5 degrees out of square 🤦‍♂️. No repeat cuts on this job.....

@julian_and_sons
@joe_w_mitchell
@gosselinkfinecarpentry
@mikeburger1017

@lulaw_carpentry and I got the basement bar set today (there are 2 more upstairs).  With internally chilled stone tops a...
08/02/2019

@lulaw_carpentry and I got the basement bar set today (there are 2 more upstairs). With internally chilled stone tops and 2 giant TV lifts in the back bar it’ll be quite the watering hole👌

@julian_and_sons
@joe_w_mitchell
@lulaw_carpentry
@mikeburger1017
@gosselinkfinecarpentry
@gypsy_hammer @ Sparta, Wisconsin

Day one of the Wisconsin install for @julian_and_sons.  There’s a ton of work to do here.  Super cool place and setting,...
07/22/2019

Day one of the Wisconsin install for @julian_and_sons. There’s a ton of work to do here. Super cool place and setting, but no cell service so stories might be limited. Stoked to be working with, and learning from some seriously talented craftsmen
@gosselinkfinecarpentry
@mikeburger1017
@lulaw_carpentry
@myk66beth
@thomas_galey4480

#hellowisconsin #cabinetinstaller #millworkinstaller #componentcarpentry #trimcarpentry #walnut #liftingheavythings @ Sparta, Wisconsin

Getting more organized a bit at a time.  Makes me smile every time I open the doors...😁 @ Frederick, Maryland
04/17/2019

Getting more organized a bit at a time. Makes me smile every time I open the doors...😁 @ Frederick, Maryland

Wrapped up this classy oak and green #twotonekitchen last week, on to the next!   @ Mount Airy, Maryland
03/24/2019

Wrapped up this classy oak and green #twotonekitchen last week, on to the next! @ Mount Airy, Maryland

Got this kitchen finished at the #fallsbrookecustom for JT Custom Builders.  There were 4 bathrooms, laundry room, and w...
01/17/2019

Got this kitchen finished at the #fallsbrookecustom for JT Custom Builders. There were 4 bathrooms, laundry room, and wet bar as well. Nice big job, but far from home, so it’s great to be done! 👍🍻 @ Fallston, Maryland

Knocking out another two tone kitchen install this week for @designkitchens.   @ Kensington, Maryland
11/15/2018

Knocking out another two tone kitchen install this week for @designkitchens. @ Kensington, Maryland

Getting cabinets set in the kitchen and butlers pantry at the #armstronghouse for @julian_and_sons. It’s an absolute ple...
09/11/2018

Getting cabinets set in the kitchen and butlers pantry at the #armstronghouse for @julian_and_sons. It’s an absolute pleasure to be working with @joe_w_mitchell @mikeburger1017 @wyomingdobey @lulaw_carpentry on this one #keepcraftalive @ Savannah, Georgia

One week from tomorrow I’ll be headed to the next travel job for @julian_and_sons and @gypsy_hammer...The Armstrong hous...
08/28/2018

One week from tomorrow I’ll be headed to the next travel job for @julian_and_sons and @gypsy_hammer...The Armstrong house in Savannah, Georgia. This will be a long one, not heading for home until the 26th. Follow along as we bring this home back to its original glory! It’ll be an honor to work alongside the talent that I will be meeting there. See you guys soon!

Aaron @aa_install was out at the #coloradokitchen for some minor punch list work and got some finished pics.  It’s great...
07/22/2018

Aaron @aa_install was out at the #coloradokitchen for some minor punch list work and got some finished pics. It’s great to see it all done and in use, those countertops turned out awesome, and that hood!!! 👌👍🍻. Been talking with @joe_w_mitchell and @aa_install about more travel work, hoping to be back on the road working on more awesome projects in the near future!
@gypsy_hammer @travisyutzy @julian_and_sons @ Colorado

It’s a wrap on the #coloradokitchen for @julian_and_sons, it’s been an absolute pleasure working with these guys.  True ...
06/18/2018

It’s a wrap on the #coloradokitchen for @julian_and_sons, it’s been an absolute pleasure working with these guys. True craftsmen and just great all around dudes! Back home to Maryland tomorrow. Looking forward to the possibility of more travel work in the future!

#keepcraftalive #cabinetinstaller #kitchencabinets #walnut #julianandsons #componentcarpentry #travelingcarpenter #ontheroad #kitchendesign #subzero #thermador #miele #roadwork #lastbeerincolorado @ Severance, Colorado

The #coloradokitchen for @julian_and_sons is done!  Appliances were installed yesterday, all that’s left for us is to cl...
06/17/2018

The #coloradokitchen for @julian_and_sons is done! Appliances were installed yesterday, all that’s left for us is to clean and apply a final coat of #danishoil. I’ll be on a plane heading back to #frederickmaryland on Monday.
#kitchen #wolfappliances #subzero #miele #kitchendesign #componentcarpentry #julianandsons #travelingcarpenter #walnut #kitchencabinets #cabinetinstaller #keepcraftalive #severancecolorado @ Severance, Colorado

Scribing some crown, got this one on the first cut!  (Though the other end of the run I chased for about 6 cuts, sometim...
06/15/2018

Scribing some crown, got this one on the first cut! (Though the other end of the run I chased for about 6 cuts, sometimes better to be lucky than good! 🤷🏻‍♂️😂)

#cabinetinstaller #kitchencabinets #coloradokitchen #walnutkitchen #componentcarpentry #travelingcarpenter #walnut #scribe #scribelife #keepcraftalive

Some progress pics from the #coloradokitchen for @julian_and_sons.  Coming along nicely, should be wrapping things up by...
06/15/2018

Some progress pics from the #coloradokitchen for @julian_and_sons. Coming along nicely, should be wrapping things up by Monday!

#cabinetinstaller #kitchencabinets #julianandsons #walnutkitchen #componentcarpentry #kitchendesign #kitchenremodel #travelingcarpenter #walnut #customkitchen @ Severance, Colorado

Scribes and miters, miters and scribes.  Having a blast and working hard on the #coloradokitchen for @julian_and_sons. E...
06/13/2018

Scribes and miters, miters and scribes. Having a blast and working hard on the #coloradokitchen for @julian_and_sons. Extended my trip through Monday, I’ll get to see this one to the end!

#cabinetinstaller #kitchencabinets #julianandsons #walnutkitchen #componentcarpentry #travelingcarpenter #gypsyhammer #scribe #mitermasters #scribelife

Thanks to @tomohisajinno for this little trick of bending the compass point to scribe to stone.  Coming in real handy on...
06/13/2018

Thanks to @tomohisajinno for this little trick of bending the compass point to scribe to stone. Coming in real handy on this #coloradokitchen for @julian_and_sons. Follow along with the build!

#cabinetinstaller #travelingcarpenter #gypsyhammer #scribe #scribelife #componentcarpentry #julianandsons #walnutkitchen #nomadcarpentry #stonescribe

This one is a wrap for me!  On to the next, stay tuned.  I had some really great feedback from some of my stories, so I’...
04/19/2018

This one is a wrap for me! On to the next, stay tuned. I had some really great feedback from some of my stories, so I’ll try to keep them coming as time allows. If you’d like me to cover something special fix, shoot me a DM. Thanks to everyone for following along and for your kind words! Cheers! 🍻.
#cabinetinstaller #componentcarpentry #carpentry #cabinets #kitchenremodel #kitchendesign #kitchen #kitchencabinets #whitekitchen #kitchenaid #kraftmaidcabinetry #keepcraftalive @ Montgomery County, Maryland

Got this one almost over the finish line today.  Few odds and ends left to go, I’ll button her up on Monday.   @ Gaither...
03/30/2018

Got this one almost over the finish line today. Few odds and ends left to go, I’ll button her up on Monday. @ Gaithersburg, Maryland

02/07/2018

The “hinge” method I use to set uppers that are bigger than me.....

#componentcarpentry #cabinetinstaller #carpenter #kitchencabinets #kitchenrenovation #kitchenremodel #worksmarternotharder

It’s always the little details that tell you the most.  Like this safety pin.  Sure, they could have used the plastic ta...
02/04/2018

It’s always the little details that tell you the most. Like this safety pin. Sure, they could have used the plastic tag ties inserted by a machine, but instead chose to employ an individual to hand attach the tags with a nice tiny little safety pin. Who does this anymore!? Kudos to you @snickersworkwear. Just one of the many reasons why you will always be my go to brand.

Now, when are you coming back to the US so I can quit pawning my belongings to pay for shipping? 🚢😂👍👊🍻

#workwear #snickersworkwear #snickersusa #comebackalready #worksmarter #hardworking #componentcarpentry #dressforsuccess #thelittledetails #details #detailsmatter #carpentry #carpenter #cabinetinstaller #trimcarpentry #workingman

60” tall uppers on the next one 😳. Better get back to the gym.... #componentcarpentry #kitchencabinets #kitchenrenovatio...
01/10/2018

60” tall uppers on the next one 😳. Better get back to the gym.... #componentcarpentry #kitchencabinets #kitchenrenovation #insetcabinets #cabinetinstaller #heavylifting #kitchendesign #kitchenremodel #kitchendecor #cabinets #cabinet #cabinetry #cabinetryinstallation #chippylife #worksmarternotharder #quality #muscles #soloinstaller

Finally picked up a set of these skookum @matthewchasewoodworks  @fastcapllc stilerite clamps and....d’oh!  🤔 #comeonman...
12/18/2017

Finally picked up a set of these skookum @matthewchasewoodworks @fastcapllc stilerite clamps and....d’oh! 🤔 #comeonman What the eff @wood_mode, get with the 32mm program, geez..... #cabinetinstaller #componentcarpentry #f**kmylife #doh #why #justmyluck #not32mm #gometric #woodmode #cabinets #kitchencabinets #fastcap #stilerite

Stepping up my #gluegame Not in love with it yet, seems a little thick for fine joints, and the 30 sec cartridge sets up...
12/14/2017

Stepping up my #gluegame Not in love with it yet, seems a little thick for fine joints, and the 30 sec cartridge sets up quick when laid on thin. Going to try some 60 sec cartridges next, see how they do. Bond is good, though I found that due to the thickness of the glue, it tended to build up the backside of the joint making a perfect 90 more like 91 or 92. A couple joints popped apart 20 min after gluing when springing them back to 90. Could be user error though, this glue system gets good reviews from the trim guys on here. We will see how it goes...... @jchcabinets @caymancarpenter @chicagocarpenter #trimcarpentry #trimglue #glue #hotsnot #hotglue #hipur #steinel #pur50 #cabinetinstaller #componentcarpentry #carpentry #triminstallation #mitermasters #glueup #stickem #frederickmd #kitchencabinets #prefinished

Not much room to move on this one, giant game of Tetris.  It is nice to do a kitchen that’s not white for a change, thou...
12/08/2017

Not much room to move on this one, giant game of Tetris. It is nice to do a kitchen that’s not white for a change, though. #boycottwhitekitchens

Address

Frederick, MD
21702

Telephone

(240) 529-7530

Website

Alerts

Be the first to know and let us send you an email when Component Carpentry posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Component Carpentry:

Videos

Our Story

We offer exceptional quality cabinet and trim installation to local contractors, builders, and designers. Whether high end or affordable, we provide the same level of quality, attention to detail, and customer service on every project. From on-site dust collection to meticulous organization and efficiency, we treat every home like our own. We welcome work with local General Contractors, Builders, and Designers so please contact us today for any of your millwork installation needs!

We are also available for installation work nationwide. Please contact us for more information about travel work.

Nearby contractors


Other Contractors in Frederick

Show All