ACTAtek

Call Website Contact the business

ACTAtek The leading web-based, Biometric, RFID Smartcard Platform for Enterprise-wide Solutions in ID Management

We specialize in IoT and ID management solutions, offering advanced biometric and RFID systems for access control and time attendance all-in-one solutions.Stay connected for cutting-edge innovations in smart security and ID management.

19/10/2026

A visitor arrives. The resident is upstairs. Who opens the door? 🚪

Traditionally, buildings need separate systems for access control, video and intercom.

But what if one device could do more?

With ACTAtek Edge AI IoT:
✅ Built-in IP video
✅ SIP intercom and doorbell
✅ Face, fingerprint, RFID, QR & PIN
✅ Direct door control — no separate traditional controller required
✅ Centralized management with AMS

One device. Multiple functions. Less complexity.

🎥 Watch the video to see ACTAtek's intercom solution in action.

💬 Installers and integrators: Would combining access control and intercom simplify your next project?

👉 Follow ACTAtek for more real-world technology demonstrations.

What if your access control system could do more than open a door—and help save energy too?Imagine this:At 8:30 AM, an e...
02/10/2026

What if your access control system could do more than open a door—and help save energy too?

Imagine this:
At 8:30 AM, an employee arrives.
ACTAtek verifies the person and grants access.

During the day, unusual activity is detected near a restricted area.
The system raises an alert for faster response.

At 6:45 PM, the last person leaves.

Now the building reacts:
💡 Lights switch off
❄️ AC switches off
🌬️ Ventilation switches off

That is the difference between a traditional access-control system and an integrated building-intelligence platform.

One platform. Three outcomes for examples:
🔐 Smarter security
🚨 Faster intrusion awareness
⚡ Smarter energy management

The real opportunity is not just securing buildings.

It is making buildings respond intelligently to the people inside them.

If you believe access control should do more than open doors, share or repost this with your network.

Why install a controller if you don’t need one?For decades, access control has been built around the controller.Reader →...
22/09/2026

Why install a controller if you don’t need one?

For decades, access control has been built around the controller.
Reader → Controller → Relay → Lock

ACTAtek removes the middle layer.

With built-in Edge intelligence and door control:
ACTAtek → Lock

That means:
✅ No separate traditional controller
✅ Less hardware to buy
✅ Less cabling to install
✅ Less panel space
✅ Faster commissioning
✅ Easier troubleshooting
✅ Fewer potential failure points

And you still get biometrics, RFID, QR, PIN, OTP, IP video, SIP intercom, online/offline authentication, and AMS centralized management.

Sometimes the smartest access-control upgrade is not adding more hardware.

For installers, sometimes the best technology is the one that gives you fewer boxes to mount and fewer reasons to come back.

What do you think — is the traditional controller still necessary in every access-control project?

It’s 8:47 PM. The last employee has left the building.The access system knows it.But the lights are still on.The air con...
01/09/2026

It’s 8:47 PM. The last employee has left the building.

The access system knows it.

But the lights are still on.
The air conditioning is still running.
Ventilation is still operating as if the building were full.

Why?

Because the access control system and the building systems are not talking to each other.

That is where ACTAtek changes the conversation.

With ACTAtek + AMS + IoT Controller, real-time identity, occupancy and sensor data can become an input for building automation:

👤 Know who is inside
💡Switch lighting based on user access presence
❄️HVAC and ventilation auto‑adjusted by occupancy and air‑quality data.
📊 Monitor everything through one platform
⚡ Keep Edge operations running even during network interruptions

ACTAtek’s unified platform is designed to connect access, workforce, visitor, safety, environment and energy functions instead of leaving them in separate silos.

Your access system already knows when people arrive and leave.

The bigger question is:

What does your building do with that information?

That is the difference between access control and building intelligence.

💬 Should access control become the “people sensor” for the smart building?

🚨 Is Your Venue Ready for Martyn’s Law?As venues prepare to implement the principles of Martyn’s Law, ACTAtek + AMS offe...
25/08/2026

🚨 Is Your Venue Ready for Martyn’s Law?

As venues prepare to implement the principles of Martyn’s Law, ACTAtek + AMS offers a unified platform to strengthen everyday security and emergency readiness.

Knowing who is inside, how people are moving, and how quickly you can respond can make a critical difference during an emergency.

👥 Real-time crowd capacity & occupancy alerts
🚨 Emergency / fire roll call
🚪 Doors, gates & turnstile access control
🚗 UHF vehicle & car park access
🔐 Face, fingerprint, RFID, QR, PIN & OTP
🧾 Visitor management
🖥️ Central monitoring with AMS
⚡ Local Edge authentication — online or offline

Access control should do more than open the entrance.
It should help organisations manage people flow, understand occupancy and respond faster when it matters most.

👉 Follow ACTAtek for practical ideas on safer venues, smarter access control and real-time building intelligence.

,

We are proud to announce that Thomas Wan, CEO of ACTAtek Group, will be speaking at Smart City Expo UK 2026 in London.Se...
20/07/2026

We are proud to announce that Thomas Wan, CEO of ACTAtek Group, will be speaking at Smart City Expo UK 2026 in London.

Session topic:
“A Unified Edge AI IoT First Smart City Platform for NEOM Smart City”

As smart cities move from vision to ex*****on, the future will not be defined by disconnected systems or dashboards alone.

It will be defined by unified platforms that connect people, security, buildings, environment, and energy into one real-time operating layer.

ACTAtek’s Edge AI IoT approach enables local authentication, online/offline operation, centralized AMS management, and smart building automation across access control, workforce, visitors, safety, IoT, and energy-saving workflows.

📍 Smart City Expo UK 2026
📅 20–21 July 2026
🏨 Leonardo Royal Tower Bridge, London

Learn more: www.smartcityexpo.co.uk

👥It starts with an ordinary situation that happens more often than people think.An employee forgets their access card at...
07/07/2026

👥It starts with an ordinary situation that happens more often than people think.

An employee forgets their access card at home.

A colleague says, “Just use mine for today.”

The door opens.

No alarm.
No warning.
No one notices.

Another day, a contractor borrows a card from someone on site because the security team is busy.

The door opens again.

Later, a lost card is found by someone else.

It still works.

From the system’s point of view, every event looks normal.

The card is valid.

The access right is approved.

The door unlocks.

But there is one question the system may not be able to answer:

💡Is the authorised person actually standing at the door?

That is the real security gap.

Traditional access control often trusts the credential more than the person carrying it.

Cards can be lost, shared, borrowed, stolen, or cloned.

And when that happens, the system may still record a “valid” access event — even if the real user was never there.

For offices, factories, schools, hospitals, data centres, government sites, banks, and restricted areas, this becomes a serious risk.

Because access control should not only ask:

“Is this card allowed?”

It should also ask:

“Is this the right person, at the right door, at the right time?”

ACTAtek helps close this gap at the edge.

ACTAtek is an Edge AI IoT device with local authentication, multi-modal verification, and built-in access-control capability.

That means authentication can happen directly at the device using:

✅ Face recognition
✅ Fingerprint
✅ RFID smart card
✅ QR code
✅ PIN
✅ OTP

ℹ️No separate traditional controller is required for the access decision.
ℹ️No network dependency for every authentication.
ℹ️No waiting for a cloud decision to unlock the door.
ℹ️No one stuck outside because the server connection is unavailable.

ACTAtek verifies the person locally at the edge.

AMS then centralises the wider workflow:

✅ User management
✅ Access policies
✅ Door schedules
✅ Visitor management
✅Workforce attendance
✅ Event logs and audit trails
✅ Emergency roll call
✅ Occupancy awareness
✅ Multi-site monitoring
✅ IoT controller dashboard, HVAC, lighting and energy-saving automation

Security should not stop at the credential.

It should verify the person, validate the access right, record the event, and connect that event into the wider building workflow.

💡Trust the person. Local Authentication at the Edge. Centralized Intelligence with AMS.

Interested in a live demo? Contact us today.

https://actatek.com/iot/contact-us/

🚶 A Visitor QR Code Is Not a Visitor WorkflowImagine this:A guest arrives at your site with a QR code. They scan it at t...
06/07/2026

🚶 A Visitor QR Code Is Not a Visitor Workflow

Imagine this:

A guest arrives at your site with a QR code. They scan it at the gate… and then the problems begin.

❌The host never approved the visit.
❌The QR code opens the door, but not the elevator.
❌Temporary access rights weren’t set, so the visitor lingers longer than expected.
❌No proper exit log, so compliance reporting is incomplete.
❌Security has no audit trail to review later.

A single QR code doesn’t solve these pain points. It only creates new ones.

What visitors really need is a workflow:

✔Pre‑registration and host approval
✔Temporary access rights that expire automatically
✔Multiple access options (QR, PIN, card, biometrics)
✔Entry and exit logs tied to audit trails
✔Optional access to doors, turnstiles, barriers, or elevators

With ACTAtek + AMS, visitor access becomes part of the same security and building‑management workflow.

That means:

✔ Better control for security teams
✔ Cleaner reporting for compliance
✔ A smoother, more professional visitor experience

👉 “One QR isn’t a workflow. What’s the biggest visitor‑management issue at your site? Let’s talk.”

⛔Stop Managing Multiple  Systems for One BuildingMany buildings still use separate systems for:☑️Access control☑️Time at...
01/07/2026

⛔Stop Managing Multiple Systems for One Building

Many buildings still use separate systems for:

☑️Access control
☑️Time attendance
☑️Visitor management
☑️Video verification
☑️IoT controllers
☑️Energy control
☑️Emergency roll call

The result is more training, more maintenance, more data silos, and slower response.

ACTAtek and AMS are designed to bring these workflows into one unified platform.

✔️One identity layer.
✔️One central management system.
✔️One source of people, access, safety, and building data.

💡Integration should simplify operations, not create another system to manage.

ℹ️What is the most painful system your team still manages separately?

Share your thoughts below — let’s discuss.

🚪One Door. Six Outcomes.A door event should do more than unlock.When someone enters a building, that one verified event ...
24/06/2026

🚪One Door. Six Outcomes.

A door event should do more than unlock.

When someone enters a building, that one verified event can support the following:

✅Security
✅Attendance
✅Visitor control
✅Occupancy awareness
✅Emergency response
✅Energy-saving automation

This is why access control should not stay isolated from the rest of the building.

With ACTAtek, occupancy data from the device—linked to IoT controllers and sensors—becomes real‑time intelligence under one unified platform. This intelligence automatically manages lighting, HVAC, and ventilation to deliver energy savings, safety, and compliance workflows.

The door is no longer just a security checkpoint.

It is the starting point for smarter building decisions.

What should access control trigger in your building today?

Follow us for more smart-building and Edge AI IoT ideas.

👉 Book a live demo:
https://actatek.com/iot/contact-us/

👉 Watch more and subscribe to our new channel:
https://www.youtube.com/

Address


Opening Hours

Monday 09:00 - 18:00
Tuesday 09:00 - 18:00
Wednesday 09:00 - 18:00
Thursday 09:00 - 18:00
Friday 09:00 - 18:00

Telephone

+85223191333

Alerts

Be the first to know and let us send you an email when ACTAtek posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to ACTAtek:

Shortcuts

  • Want your business to be the top-listed contractor?

Share