01/09/2026
🚨 WARNING PLEASE MIST COAT YOUR BARE PLASTER 🚨
This one put me through the ringer
I have just completed what can only be described as the bathroom from hell...
The previous/initial paintwork was not mist coated resulting in serious adhesion issues hence the never ending flaking and failing paint. Not just on the ceiling but the walls too.
After an initial failed attempt that uncovered even more flakey paint 😴 This was the process done to achieve the final finish..
- Scraped back all the flakey paint on the ceiling & walls to a solid edge
- Locked down the edge of the old paint with Zinsser Peel Stop
- Stabilised the entire surface with Zinsser Gardz
- Blended the repairs in with fine surface filler
- Spot primed the filler with Zinsser Bullseye 123
- Then 2 coats of Zinsser Perma White
The biggest challenge with jobs like these isn't actually putting the paint on, it's making sure what you're putting it on is made sound.
From a flaking mess - to a clean fresh properly stabilised bathroom.
Patience, preparation & the correct products got it there in the end.
If you have recently had anything plastered it is vital you apply a mist coat so it seals the porous plaster allowing your top coat to adhere properly instead of eventually flaking off.