Electrical Safety UK

Electrical Safety UK The UK's leading exponent of Arc Flash Technology - Providing a Holistic Approach to the Management of Electrical Safety.

The Best Time to Reduce Arc Flash Risk Is Before the Equipment Is InstalledMany electrical risks can be influenced at th...
31/08/2026

The Best Time to Reduce Arc Flash Risk Is Before the Equipment Is Installed

Many electrical risks can be influenced at the design stage.

Remote operation, arc-resistant equipment, improved accessibility, physical separation of energy sources and clear status indication can all help reduce exposure to electrical hazards.

Designing safety into an electrical system can reduce reliance on administrative controls and PPE later in its operating life.

The question is not simply whether a system will work.

It's whether it has been designed to allow people to operate and maintain it as safely as possible.

Read our latest article to explore the engineering controls that can make a difference: https://elecsafety.co.uk/engineering-controls-that-reduce-arc-flash-risk/

A permit to work is only as good as the planning behind itA permit to work is an important tool for controlling higher-r...
28/08/2026

A permit to work is only as good as the planning behind it

A permit to work is an important tool for controlling higher-risk activities.

It should clearly communicate what work is authorised, the equipment or area involved, the hazards, precautions, isolations and responsibilities.

But a permit is not a substitute for a risk assessment, competent people or effective supervision.

Its value comes from the quality of the planning and the behaviours that support it.

Before work begins, everyone involved should understand exactly what is being done, what the risks are and where their responsibilities begin and end.

Are your permit-to-work arrangements providing real control or simply creating more paperwork?

Read more: https://elecsafety.co.uk/safe-systems-of-work/

Isolation Is More Than Opening a DisconnectEffective electrical isolation is a critical part of reducing risk before wor...
27/08/2026

Isolation Is More Than Opening a Disconnect

Effective electrical isolation is a critical part of reducing risk before work begins.

A reliable isolation process should consider all potential energy sources, including generators, photovoltaic systems, stored energy, back feeds, control circuits and interconnected equipment.

It also requires clear labelling, documented procedures, suitable testing and properly maintained isolation points.

Opening a device is one thing.

Confirming that equipment is de-energised and cannot be unintentionally re-energised is another.

How robust is your electrical isolation process?

Find out more in our latest article: https://elecsafety.co.uk/engineering-controls-that-reduce-arc-flash-risk/

Are Your Safe Systems of Work Actually Safe?Having procedures in place is one thing.Making sure they are understood, pra...
26/08/2026

Are Your Safe Systems of Work Actually Safe?

Having procedures in place is one thing.

Making sure they are understood, practical and consistently followed is another.

Electrical safety depends on more than technical knowledge and written documentation. When work is poorly planned, responsibilities are unclear or isolations are not properly verified, even experienced people can be exposed to serious risk.

A safe system of work should clearly define the task, the hazards, responsibilities, required controls, competence and what should happen if conditions change.

The question is not simply whether your organisation has procedures.

It is whether they work when it matters.

Read our latest article to explore what effective safe systems of work should look like: https://elecsafety.co.uk/safe-systems-of-work/

Could Your Protection System Be Increasing Arc Flash Risk?When an electrical fault occurs, every second matters.Well-coo...
25/08/2026

Could Your Protection System Be Increasing Arc Flash Risk?

When an electrical fault occurs, every second matters.

Well-coordinated protection systems can reduce Arc Flash incident energy by clearing faults more quickly, while also helping to limit equipment damage and unnecessary outages.

However, protection settings should not be treated as a one-off commissioning exercise.

Changes to your electrical system, transformer capacity, motor loads, generation or system configuration can all affect fault current and clearing times.

When were your protection settings last reviewed?

Read our latest article to explore the engineering controls that can help reduce Arc Flash risk:

Read the full article: https://elecsafety.co.uk/engineering-controls-that-reduce-arc-flash-risk/

Another 5-Star Review for the ESUK Training Team ⭐⭐⭐⭐⭐There’s nothing more rewarding than hearing directly from the peop...
25/08/2026

Another 5-Star Review for the ESUK Training Team ⭐⭐⭐⭐⭐

There’s nothing more rewarding than hearing directly from the people who attend our training courses.

We’re delighted to have received another **5-star review** following one of our recent courses.

Thank you to our latest delegate for taking the time to share their feedback. We really appreciate it.

At Electrical Safety UK, we’re committed to delivering practical, engaging and high-quality training that gives delegates the knowledge and confidence they can take back into the workplace.

A huge thank you to everyone who chooses to train with us and takes the time to leave a review. Your feedback means a great deal to the whole team.

Looking for electrical safety training for yourself or your team? Get in touch to find out how we can help.

https://elecsafety.co.uk/training/

City & Guilds 2382-26: Level 3 Award in Requirements for Electrical Installations BS 7671: 2018+A4:2026📅 14th - 16th Sep...
19/08/2026

City & Guilds 2382-26: Level 3 Award in Requirements for Electrical Installations BS 7671: 2018+A4:2026

📅 14th - 16th September 2026
➡️ Rotherham S60 1DX

📅 17th - 19th November 2026
➡️ Rochester ME3 9GX

In April 2026 BS 7671:2018+A4:2026 was introduced, replacing the previous version of the IET Wiring Regulations. From 15th October 2026 all electrical design, installation and inspection and testing work must comply with the latest version of the British Standard.

This qualification is primarily aimed at practising electricians with relevant experience and other allied professionals e.g. surveyors, consultants and other trades needing to update and enhance their understanding of the IET Regulations.

Book now: https://elecsafety.co.uk/courses/city-guilds-2382-26-level-3-award-in-requirements-for-electrical-installations-bs-7671-2018a42026/

What Does City & Guilds Assured Actually Mean?You may have seen us announce that our Basic Electrical course is now City...
17/08/2026

What Does City & Guilds Assured Actually Mean?

You may have seen us announce that our Basic Electrical course is now City & Guilds Assured, but what does that mean for learners?

City & Guilds Assured is a quality mark for learning programmes. It demonstrates that the course has been reviewed by City & Guilds and meets their assurance requirements.

It gives learners and employers additional reassurance around the quality, structure and content of the training.

It's important to clarify that City & Guilds Assured status is not a regulated qualification.

Instead, it provides independent assurance of the learning programme.

Want to know more about our City & Guilds Assured Basic Electrical course?

Get in touch with the ESUK training team or visit our website.
https://elecsafety.co.uk/about/contact/

The Most Dangerous Electrical Equipment May Look Perfectly FineA visual inspection can tell you a lot about the conditio...
14/08/2026

The Most Dangerous Electrical Equipment May Look Perfectly Fine

A visual inspection can tell you a lot about the condition of electrical equipment.

But it can't tell you everything.

Some of the highest incident energy levels identified by ESUK have been found on equipment that appeared perfectly serviceable from the outside.

The true level of risk only became clear through detailed modelling of the electrical network.

That's why understanding Arc Flash risk requires more than looking at the equipment. It requires understanding how the entire electrical system behaves.

Could you be overlooking a risk that isn't visible?

Find out why detailed Arc Flash Risk Assessments are so important in food manufacturing.
https://elecsafety.co.uk/arc-flash-risk-assessments-in-food-manufacturing-why-understanding-your-electrical-risk-has-never-been-more-important/

Electrical Safety Should Be Designed In, Not Added LaterWhen designing a new industrial electrical system, Arc Flash sho...
12/08/2026

Electrical Safety Should Be Designed In, Not Added Later

When designing a new industrial electrical system, Arc Flash shouldn't be something considered once construction is complete.

An early Arc Flash Study can help influence fundamental design decisions, including equipment selection, protection settings, room layouts, cable routes and system configuration.

This provides an opportunity to reduce electrical risk before equipment is installed, rather than trying to resolve problems when options are limited and changes are more expensive.

For heavy industrial facilities, safety, reliability and maintainability need to be considered from the very beginning.

Want to understand why an early Arc Flash Study can make such a difference?

Read our latest article: https://elecsafety.co.uk/designing-safe-reliable-and-efficient-electrical-systems-for-heavy-industrial-facilities/

Address

2 Genesis Business Park, Sheffield Road
Rotherham
S601DX

Telephone

+441709961666

Website

Alerts

Be the first to know and let us send you an email when Electrical Safety UK posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category