Marley Woodwork

Call Contact the business

Marley Woodwork Hi all πŸ‘‹

My name is Ben, a self employed carpenter based in central Cornwall. Bye for now ✌️
(1)

Thank you for visiting my page, I look forward to hearing from you in the near future to discuss your exciting projects!

Good morning all πŸ‘‹Here's a few pictures from the start of this week making a few little improvements in this van.I remov...
14/10/2026

Good morning all πŸ‘‹

Here's a few pictures from the start of this week making a few little improvements in this van.

I removed the old bench seat from in front of the bed and have made a starage box / seat to one side by the fire and the opposite side a housing for a compressor fridge to sit in.

I had a spare swivel arm and table laying around which they were more than happy to take off my hands so this definitely makes use of a small space.

I ha e also created a pull out system for the front of the bed without adapting what was already there to allow the bed to be nearly two foot longer down the length of the van πŸ‘Œ

For any enquiries please don't hesitate to get in contact via ;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers,
Ben ✌️

Morning folks πŸ‘‹Here's a couple of hanging rails I made up to allow for drying those damp clothes off during the wet mont...
03/10/2026

Morning folks πŸ‘‹

Here's a couple of hanging rails I made up to allow for drying those damp clothes off during the wet months when the burner is lit πŸ‘Œ

The rail brackets ice made up from some off cuts of birch ply and they're looking good πŸ‘Œ simple but effective.

For any enquiries please don't hesitate to get in contact via ;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all, have a good weekend.

Ben ✌️

Here's another one from today..."little lenny" log burner install into this van which I helped on the conversion with a ...
30/09/2026

Here's another one from today...

"little lenny" log burner install into this van which I helped on the conversion with a couple years back now.

Pretty cute burner right?

Tomorrow I'll be installing a diesel heater into the van too, to allow the van to warm up in the morning before you get out of bed to get the fire lit on those colder mornings that are drawing in πŸ”₯

A few other little work work jobs to do here too so keep ya eyes peeled for more to follow πŸ‘€

For any enquiries please don't hesitate to get in contact via ;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all,
Ben ✌️

Evening all πŸ‘‹Here's one from the beginning of the week...Repurposing an old front door for a sliding barn door style. Th...
30/09/2026

Evening all πŸ‘‹

Here's one from the beginning of the week...

Repurposing an old front door for a sliding barn door style. The bottom of the door was rotted out so I've routed in a new piece of timber across the bottom edge aswell as also widening the door either side to ensure in covered the door opening from front room to kitchen when shut!

Looks pretty lush now hey, just needs oiling/painting from the client and it'll be complete πŸ‘Œ

Another old door was refitted in the house too back into the old framework once the framework was secured back into the stone wall πŸ‘

For any enquiries please don't hesitate to get in contact via ;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all,
Ben ✌️

Good afternoon folks πŸ‘‹Here's the complete interior build for this early Bay VW...The bus came into me last week ready fo...
25/09/2026

Good afternoon folks πŸ‘‹

Here's the complete interior build for this early Bay VW...

The bus came into me last week ready for a spruce up this week. I've taken out the old tired looking interior and given it a new lease of life.

I've made a bespoke built housing for the "porta potti" which can be used in situ in the van aswell as used as a seat but can also be lifted out and used outside when camping.

The bulkhead has ample storage room which plenty of access doors. Two drop downs at the top with lovely antique brass drop stays and the left side opening with a removable shell to allow for easier access into the bottom section when the seat unit is in place aswell as a small door below too. To the right side are two lower section doors which also have a shelve inside for a cutlery tray to live.

The top I have once again used an original style Devon laminate along with the aluminium trip and black insert around the front edge.

The birch plywood I have finished with a quality interior wax.

The light coloured birch inside the bus makes the space feel so much brighter and bigger.

Let me know your thoughts πŸ‘Œ

And for any enquiries drop me a message via ;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all,
Ben ✌️

A little sneak preview into this week's job...This time we've got an early Bay in the shop for an interior makeover πŸ‘ŒKee...
22/09/2026

A little sneak preview into this week's job...

This time we've got an early Bay in the shop for an interior makeover πŸ‘Œ

Keep an eye out toward the end of the week for more updates on the build!

Cheers,
Ben ✌️

Good afternoon folks πŸ‘‹Here's this week's work I've taken on for my folks, for me second week up north...I began on Sunda...
11/09/2026

Good afternoon folks πŸ‘‹

Here's this week's work I've taken on for my folks, for me second week up north...

I began on Sunday by laying a new subfloor to meet the raised kitchen floor to allow for the LVT to run throughout the ground floor of the property.

The sub floor was primed with the appropriate primer before beginning laying the herringbone tiles. Approximately 40 square metres has been layed.

Today I've just finished off by a nice bead of suitable sealant around the perimeter to meet the skirtings.

For any enquiries please don't hesitate to get in contact via ;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all,
Ben ✌️

Good afternoon folks πŸ‘‹Here's a kitchen I've installed from start to finish with tiling too this week for me sister up no...
05/09/2026

Good afternoon folks πŸ‘‹

Here's a kitchen I've installed from start to finish with tiling too this week for me sister up north...

Began on Sunday last week and seen it through all the way this week from flat pack units to built, installed and tiled.

Have had to run some fresh plumbing in for the integrated dishwasher and new sink.

Unfortunately waiting on delivery of the correct oven and washing machine which will be added in a couple of weeks time but I'm sure you csn agree its looking pretty swish πŸ‘Œ

For any enquiries please don't hesitate to get in contact via ;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all,
Ben ✌️

Good afternoon all πŸ‘‹Here's something a little different for you.I've just hand crafted this slanted dog bowl stand for m...
25/08/2026

Good afternoon all πŸ‘‹

Here's something a little different for you.

I've just hand crafted this slanted dog bowl stand for my Spaniel... Mainly to keep her ears out of the water and food bowls when she's using them to stop the matting of the hair!

I've built this from 18mm Latvian birch plywood and finished with a water resistant Osmo Oil. It is a very solid construction and water resistant.

Im going to put it out there and see if anyone would be interested in purchasing one?

If I gather enough interest then I will begin making a batch in a couple of weeks time.

For the work and time involved in making this one, I would price it at Β£50 per stand.
Again, if there's enough interest then I would be able to reduce this cost slightly.

Let's see what happens!



If youd like to get in contact about purchasing one then please reach me via :

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all,
Ben & Maggie ✌️🐢

24/08/2026

Good afternoon all πŸ‘‹

Here's a few pictures I've put together to showcase some of the recent VW interior work I've taken on...

Im looking to get some more booked in to the workshop over these coming winter months, with another coming in in September πŸ‘Œ

If you like what you see and would like to discuss your interior plans then I'd love to hear from you!

Also, small van conversions I'm keen to take on from full interior, electrics and plumbings. I've got the space to accommodate smaller vans so the coming winter months means it's ideal to make your small space dreams come true.



Feel free to get in touch via;

Facebook Marley Woodwork
WhatsApp 07745343163
Email [email protected]

Cheers all!
Ben ✌️

Address

Redruth
TR16

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm
Saturday 9am - 3pm

Telephone

+447745343163

Website

Alerts

Be the first to know and let us send you an email when Marley Woodwork posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Marley Woodwork:

Shortcuts

Share

Category