Performance Membranes Australia

Performance Membranes Australia We are your one-stop for Pro Clima systems, products, accessories, education & installation training🛠
(1)

Heads up: our office will be closed Thursday 3 September.The whole team is heading to Bowens Expo 2026 for the day, so i...
31/08/2026

Heads up: our office will be closed Thursday 3 September.

The whole team is heading to Bowens Expo 2026 for the day, so if you're around, come find us there instead of ringing the office.

Normal hours resume Friday. Enquiries and orders will be picked up as soon as we're back.

Will we see you at the expo?

30/08/2026

Catch the PMA team at Bowens Expo Building + Innovation
THURSDAY 3RD SEPTEMBER 1pm - 8pm

We're at Stand 93, Melbourne Exhibition Building, with the full Pro Clima range on display including Solitex Extasana.

Come talk building envelopes, cavity closers, and how to stop leaky building syndrome before it starts.

Free entry, giveaways all weekend, and we'll be right in the thick of it.

Who's coming through? Drop a comment and we'll say g'day.🤘🏼

Bowens

28/08/2026

PROJECT PMA

Episode 4: Sealing Through Battens and Cladding - Deflect it, Don't collect it

Getting the window sealed is only half the job. The seal has to survive everything that gets fixed on top of it.

150mm and 200mm Tescon Extoseal tape forms an over-flashing across the front and along the strip drain, closing off the top of the assembly before battens go on.
Fixing battens over a sealed area means driving nails and screws straight through it, which is normally where a seal starts to fail.

The tape is designed for exactly this: as the fastener passes through, the adhesive is pulled into the hole and closes around it from the inside, rather than leaving an open pe*******on.

The result is a wall that stays watertight and weathertight after the cladding goes on, not just before it. Water is deflected rather than collected, with drainage paths out through the front, down the ventilated cavity, or through the seal itself.

26/08/2026

Repost: 💡

💡Your new home is sealed tighter than any your grandparents built but the code that seals it also makes the wall stay open to water vapour, so the moisture your family makes can dry outward instead of condensing inside the wall. Sealed against draughts, open to vapour.

Our Pro Clima external WRB system is the control layer that is compliant to the code requirements. For any further information, reach out via membranes.build.

Celebrating a 1 year work anniversary today to Angelo!Whether he's on the road meeting clients or in the showroom talkin...
24/08/2026

Celebrating a 1 year work anniversary today to Angelo!

Whether he's on the road meeting clients or in the showroom talking through the finer points of high-performance products, Angelo brings the kind of experience and genuine care that's hard to fake. It's why clients trust him.

Outside of work, he's got an even bigger reason to smile these days, Angelo recently became a grandfather, and he's soaking up every moment of it.

Thanks for everything you bring to the team, Angelo!

22/08/2026

PROJECT PMA

Episode 3: Sealing the Window Frame

A continuous moisture barrier around a window frame comes down to two things: tape width and corner technique.

Two widths are used here, 200mm to the outside and 150mm to the inside, with a split release paper that makes clean installation easier on site. Coverage starts with a 50mm overlap, extending 150mm upward, then a press tool works the membrane firmly into the corners before the tape is stuck to the front of the frame and
stretched around.

Corners are where this detail is won or lost. Stretching the tape into the corner is the easiest way to create a future leak, so instead it's carefully worked around the corner rather than pulled tight across it.

Condensation behind a finished material like copper is inevitable, not a defect. What matters is whether the assembly gives that moisture somewhere to go.

Correct tape width, overlap and corner technique are what keep that drainage path open.

Merchant of the Month: Rochester Mitre 10 🔨Serving the Rochester community since 2015, Rochester Mitre 10 is a genuine o...
20/08/2026

Merchant of the Month: Rochester Mitre 10 🔨

Serving the Rochester community since 2015, Rochester Mitre 10 is a genuine one-stop shop for hardware, building supplies and everyday trade needs, with a team known for going the extra mile to source what's not on the shelf.

From timber cut to length on request to genuine trade support through their Tradie Discount program, it's the kind of local hardware store that backs builders the way we back ours.

Proud to work alongside merchants like this!

Join us for a hands-on training session at David O Jones Mitre 10 StawellYour chance to get up close with the products, ...
18/08/2026

Join us for a hands-on training session at David O Jones Mitre 10 Stawell
Your chance to get up close with the products, ask the questions, and sharpen your install game.

We'll be running through best practice for weather tight & airtight membranes, tapes, and high-performance building solutions - straight from the team that knows them inside out.

We will also be highlighting our cavity closer range for NCC 2025 compliance

✅ What to expect:
- Hands-on product demos
- Install tips & techniques
- Q&A with our team
- A chance to connect with other builders in the area

📅 Wednesday 26TH August
⏰ 3 hours
📍David O Jones Mitre 10 Stawell

Whether you're new to high-performance building or looking to tighten up your detailing, this one's worth the trip.

👷‍♂️ Book via our website now to secure your spot. https://membranes.build/installation-training/

16/08/2026

How do you get a GAF shingle roof system to BAL-40 without losing ventilation?

We took our standard Wall-Top Cavity Closer to Bowen's Rethink Building Hub in Hastings and added it into GAF's code-marked shingle display to find out.

The closer sits at the wall-to-fascia junction, closing the gap between the fascia and the first course of shingles. GAF's drip edge flashing and membrane layer over the top, while the closer keeps the cavity ventilated underneath the ply, all the way through to the ridge.

The result: a bushfire-compliant detail that doesn't compromise on airflow.

It's a good example of what the profile is built for, standard sizing, adaptable detailing, across different building envelope systems.



Full specs and install guidance: www.cavitycloser.com.au

15/08/2026

Right product. Right training. Right result.

Bowens offers training to ensure correct technique for installing pro clima wall membranes and flashing tape - the small details that determine whether a build is truly airtight.

Backing our trade partners with real product knowledge and hands-on training is how we help you build it right, every time.

Address

Unit 38, 1470 Ferntree Gully Road
Knoxfield, VIC
3180

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61477553302

Website

,

Alerts

Be the first to know and let us send you an email when Performance Membranes Australia posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Performance Membranes Australia:

Shortcuts

Share